MyPhone MyPad 2 Factory Restore Firmware Reflash 100% Working

MyPhone MyPad2 Firmware Flashing Procedure

Warning:  

THIS PROCEDURE IS FOR MYPHONE MYPAD2 TABLET AND SHOULD NOT BE USED FOR ANY OTHER TABLET.

If your MyPad2 is Pattern Lock or Hangs on Logo

Then you have landed on the right site. We are here to help you.  Our solution guarantees 100% Success. 

Since there is no combinations of buttons that works to restore it to factory settings, we will have to reflash the firmware.

Things needed:

• MyPad2 Tablet with atleast 50% battery
• Firmware
• Software for Reflashing Firmware
• Connecting Cable

STEP BY STEP INSTRUCTIONS:

STEP 1 :  RUN THE FLASHING PROGRAM

A pop up will appear asking if you want a guide for a upgrading. Select NO since you're using my guide.

STEP 2 :  CLICK SELECT IMG AND BROWSE FOR THE FIRMWARE WE PROVIDED YOU.

STEP 3 :  SWITCH OFF YOUR TABLET IF ITS ON AND PLUG IN USB CONNECTING CABLE TO YOUR TABLET.  DO NOT CONNECT TO COMPUTER YET.

STEP 4 :  PRESS VOLUME DOWN BUTTON ON THE TABLET AND CONNECT THE CABLE TO COMPUTER.  PRESS POWER BUTTON MULTIPLE TIMES AS SHOWN BELOW

STEP 5 :  Pop up will appear asking if you want mandatory format, just click YES and YES again.

STEP 6:  Wait until a pop up says "upgrade succeeds"

Cheers!! You have successfully flashed your tablet. It is now safe to unplug your tablet from computer. If the tablet wont restart itself press the power button to turn it on.  

WARNING:  DO NOT TURN OFF THE COMPUTER OR UNPLUG THE CABLE WHILE THE PROGRAM IS FLASHING THE TABLET.

FINAL PICTURES - FINISHED PRODUCT

DOWNLOAD PROCEDURE

Since we have worked hard to get this to you and save you from throwing your tablet into trash.  We deserve your appreciation by clicking the DONATE button below.  As soon we will receive your donation we will send you the link to download the package which consists of Software, Instructions & Image.  The software takes less than 10 minutes to make your tablet work again.